The Mytee 80-120 Prep Center S w/ Heat is a cutting-edge automotive detailing system designed to streamline the detailing process for professional car detailers. This all-in-one solution boasts an impressive combination of heated extraction, dry vacuuming, and air drying capabilities, making it the ultimate tool for those looking to improve efficiency and productivity in their detailing work.
The Mytee 80-120 Prep Center S w/ Heat features a powerful 120 PSI solution pump, ensuring consistent and effective water flow for superior cleaning results. The 1,200-watt inline heater guarantees consistent heat, optimizing extraction performance and making it easier to remove stubborn dirt and stains. Its compact and mobile design allows for easy transport and maneuverability around vehicles, while the 25-foot vacuum and solution hose provide ample reach for cleaning even the largest vehicles.
In addition to its powerful cleaning capabilities, the Mytee 80-120 Prep Center S w/ Heat is designed with user-friendliness in mind. Its easy-to-use controls make it suitable for both professionals and novices alike, and the machine comes complete with a 3-inch stainless steel upholstery tool and a 25-foot power cord, ensuring you have everything you need to get started right out of the box.
Choosing the Mytee 80-120 Prep Center S w/ Heat over competing products means investing in a versatile and efficient machine that will save you both time and effort on every job. Its all-in-one design eliminates the need for multiple tools, while its consistent performance and user-friendly controls make it an invaluable addition to any professional car detailing setup.
Warranty: 90 days for parts, 2 years for any major components (pumps, motors, heaters, etc.), and 5 years for the housing of the machine
Main Features:
- Powerful 3-stage vacuum motor for efficient extraction and drying
- Built-in 1200-watt in-line heater for improved cleaning performance
- Large 10-gallon solution tank and 9-gallon recovery tank for extended operation
- Versatile cleaning capabilities for carpet, upholstery, and hard surfaces
- Compact design with built-in storage for tools and accessories
- Durable roto-molded polyethylene construction for long-lasting use
- User-friendly control panel for easy operation
What's Included in the Kit:
- Mytee 80-120 Prep Center S w/ Heat
- 25-foot vacuum and solution hose
- 25′ dry vacuum hoseStainless steel upholstery tool
- 8400P Air Lite Upholstery Tool
- Dry vacuum claw
- Dry vacuum crevice tool
- Blower attachment tool
Why Use This Over Competing Products:
- Powerful extraction capabilities for faster drying times
- Built-in heater for improved cleaning performance on tough stains
- Versatile cleaning options for various surfaces
- Compact design with built-in storage for easy transportation and organization
- Durable construction for long-lasting use in professional environments
Directions for Use:
- Fill the solution tank with the appropriate cleaning solution and warm water
- Connect the vacuum and solution hose to the extractor and the desired cleaning tool
- Plug the extractor into a grounded electrical outlet
- Turn on the vacuum motor and heater, adjusting the temperature as needed
- Begin cleaning by applying the cleaning solution to the surface and extracting the liquid using the appropriate tool
- Make multiple passes over the area to ensure thorough extraction and drying
- Refill the solution tank and empty the recovery tank as needed during operation
- Once finished, turn off the extractor and unplug it. Empty any remaining liquid from the tanks and clean the tools and hoses
Best Practices and Tips:
- Pre-treat heavily soiled areas with a pre-spray for improved cleaning results.
- Perform a colorfast test on the surface before cleaning to ensure the cleaning solution is safe for use.
- Use a carpet rake or brush to agitate the cleaning solution on carpets for better stain removal.
- Always use the recommended cleaning solution and follow the manufacturer's guidelines for dilution ratios.
Relevant Safety Information:
- Always unplug the extractor when not in use
- Do not use the extractor near flammable liquids or vapors
- Ensure proper grounding and use a GFCI-protected outlet
- Follow the manufacturer's guidelines for maintenance and cleaning
Body |
• Roto-molded polyethylene housing • 10" (25.4 cm) foam-filled rear wheels • 4" (10 cm) locking front casters
|
Solution Tank |
12 gallon (45.4 L) approx. capacity
|
Vacuum Tank |
12 gallon (45.4 L) approx. capacity
|
Vacuum |
Single 3-Stage Vacuum Motor • 100 CFM • 130" water lift
|
Pump |
Diaphragm Demand Pump • 120 PSI • 1.3 GPM
|
Heater |
REAL HEAT system – 1,200W – 210ºF maximum
|
Chemical Dispenser |
Three bottles with hoses & adjustable nozzles – Powered by shop air source, 30 PSI max.
|
Package Includes |
• 4" upholstery tool (choose between Air Lite and stainless steel) • 25' Vacuum and Solution Hose Combo • 25' Dry Vacuum Hose • Dry Vacuum Claw • Dry Vacuum Crevice • Blower Attachment Tool
|
Power Cord |
Single 25' (7.6 m) 12/3
|
Amp Draw (110-120V 60Hz) |
Cord One: 20 amps
|
Amp Draw (220-240V 50Hz) |
Cord One: 10 amps
|
Net Weight |
144 lbs. (65.3 kg)
|
Machine Dimensions |
31" x 19" x 55" (78.7 cm x 48.2 cm x 139.7 cm)
|
Shipping Weight |
190 lbs. (86.2 kg) (does not include pallet weight)
|
Shipping Dimensions |
42" x 24" x 74" (106.7 cm x 61 cm x 188 cm)
|