Rupes BigFoot LH19E Rotary Polisher - 5" - Tool Only

The Rupes Bigfoot Rotary Buffer is a high-performance rotary polisher designed for professional car detailers seeking superior polishing and paint correction capabilities. This powerful tool features a compact and ergonomic design, allowing for precise control and maneuverability in tight spaces. Engineered for maximum efficiency and durability, the Bigfoot Rotary Buffer offers a smooth, vibration-free operation that helps achieve stunning results with minimal effort.

Main Features:

• Powerful 1200 W motor for efficient paint correction and polishing
• Electronic speed control with variable speed settings (450-1700 RPM) for precise control
• Progressive trigger for improved speed control and flexibility
• Ergonomic and lightweight design for comfortable, extended use
• Soft-start function for smooth, controlled operation
• Anti-spinning shroud prevents free spinning and reduces pad wear
• Designed and manufactured by RUPES, a leader in professional car detailing equipment

What's Included:

• RUPES Bigfoot Rotary Buffer - LH19E
• (1) - 5" (125mm) backing plate - 995.001
• (1) - Anti-vibration D-loop handle - 811.374/C
• Wrench for backing plate removal

Why Choose This Over Competing Products

• Precision and Control: The electronic speed control, progressive trigger, and ergonomic design provide exceptional control over the polishing process
• Versatility: The variable speed control and powerful motor accommodate a wide range of applications, from paint correction to applying waxes and sealants
• Durability: RUPES is known for its high-quality tools, ensuring that the Bigfoot Rotary Buffer will provide consistent performance over time
• User-friendly Design: The well-balanced, ergonomic design makes the Bigfoot Rotary Buffer easy to use for both beginners and experienced detailers

Directions for Use:

1. Prepare the surface: Wash and dry the vehicle thoroughly. Decontaminate the paint with a clay bar or iron remover, if necessary
2. Choose the appropriate pad and polish: Select the correct pad and polish combination based on the paint's condition and desired results
3. Attach the pad: Center the pad onto the backing plate, ensurin it's secure and aligned
4. Apply the polish: Apply a small amount of polish to the pad or the surface, using either the "butterfly" or "dot" method
5. Set the speed: Adjust the speed control dial to the appropriate setting for the task at hand
6. Begin polishing: Start the polisher with the pad flat on the surface. Using moderate pressure, work in a 2'x2' area using a cross-hatch pattern (horizontal and vertical passes) until the polish begins to clear
7. Inspect the results: Wipe away the polish residue with a clean microfiber towel and inspect the surface for defects. If necessary, repeat the process until the desired result is achieved
8. Finish the job: Once satisfied with the results, apply a wax or sealant to protect the paint

Best Practices:

• Always use the appropriate pad and compound for the specific task
• Maintain a flat pad-to-surface contact for optimal results
• Avoid applying excessive pressure, as it may cause holograms or other paint defects
• Frequently clean and replace pads to ensure efficient polishing and reduce the risk of damaging the paint
• Start with a lower speed setting and gradually increase it as needed to prevent sling and ensure a controlled operation
• Work in small, manageable sections to maintain consistent results across the entire vehicle
• Keep the polisher moving to avoid generating excessive heat and causing paint damage

Safety Information:

• Always wear appropriate personal protective equipment, such as safety glasses, gloves, and a dust mask
• Ensure the working area is well-ventilated to avoid inhaling dust or fumes
• Disconnect the power source before changing pads, backing plates, or performing any maintenance on the polisher
• Do not use the polisher if the power cord or plug is damaged
• Avoid using the polisher near flammable materials or in wet conditions

Technical Specs:

• Backing pad: 125mm-5" / 150mm-6" / 165mm-6.5"
• Power: 1200 watt
• 450-1700 R.P.M.
• Weight: 2.2kg-4.85lbs
• Backing pad thread: M14