Diamond Wheels nanodiamond coating is resistant to high temperature exposure while providing all the benefits of a paintwork coating. With proper preparation, Diamond Wheels will provide up to 12 months of brake dust and road grime protection and make your wheels always stand out
Product Longevity:
- 12 months hydrophobic protection, keeps rims & brake calipers clean and glossy
What You'll Need:
- Diamond Body Prep 100ml + Sprayer
- Applicator Pad
- Microfiber Towels
- Gloves
Finish and Residues:
Directions for Use:
- Prepare the wheels by washing, then treat with Diamond Body Prep
- Shake Diamond Wheels well for 15 seconds and apply 15 drops to an applicator
- Apply generously and evenly over all parts of the wheel. Wait 3-5 mins and polish off excess with a low-nap microfiber towel
- Allow to cure for 1 hour before using the vehicle
Best Practices:
- Appropriate for metal surfaces which experience high-heat. As the coating bonds to the surface a haze will appear. This indicates coating is ready to be removed
- If the product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off
- Applicable only to smooth leather or leather-replacement surfaces (do not apply to suede or alcantara)
- Apply when air humidity does not exceed 70%
- Apply in temperatures above 10°C/50°F degrees. Wear protective gloves. If accidentally applied to non-leather surfaces, clean up immediately as long exposure may cause staining
