Jade Emerald Ceramic Starter Kit with Clay Bar

Description:

Jade Ceramics are clear, nano-crystalline ceramic coatings that protect automobile substrates from weather, chemicals, physical abrasion and UV rays while repelling water, dirt and other contaminants via a self-cleaning effect. Jade Ceramics apply an ultra-hard, inert, durable coating that is several microns thick and imparts a deep, reflective shine.

Directions:

Ensure surface is clean and all paint correction is complete before applying coating. Use a surface prep spray to remove any oils or residues from polishing or claying.  Saturate a suede applicator or similar with numerous drops of material from the dripper bottle. Apply the coating to a 3x3 ft area of the vehicle using a cross-hatch pattern with slight overlap to level the product. Wait until it becomes tacky and then gently remove excess product using a clean suede cloth or low nap microfiber towel. Check with your finger to assess tackiness. Do NOT allow coating to come in contact with water for 48 hours while curing - if it does, remove water promptly. Additional coats are not needed but if desired allow at least one hour between applications. Do NOT apply in direct sunlight or to a hot surface. Cure time is dependent on environmental conditions - test product on a small inconspicuous area first to gauge cure time.