Jade Emerald - Quartz Ceramic Coating - 60 mL Bottle

Part #:

JDC902-01-003

SKU:

JD-JDC902-01-003

Applies an ultra hard, inert, durable coating that is several micron thick and imparts a deep, reflective shine
UV tracer technology illuminates under UV light so there is never a missed spot
9H on the ceramic hardness scale, the highest possible rating
Can be registered with CarFax to help maintain resale value of the vehicle
Protects automobile substrates from weather, chemicals, physical abrasion & UV rays
Repels water, dirt and other contaminants via a self cleaning effect
Use Reboot+ as a maintenance for your ceramic coating
4 year guarantee with proper maintenance

Availability

Fargo - Chat Or Call For Availability

Sioux Falls - In Stock

Applies an ultra hard, inert, durable coating that is several micron thick and imparts a deep, reflective shine
UV tracer technology illuminates under UV light so there is never a missed spot
9H on the ceramic hardness scale, the highest possible rating
Can be registered with CarFax to help maintain resale value of the vehicle
Protects automobile substrates from weather, chemicals, physical abrasion & UV rays
Repels water, dirt and other contaminants via a self cleaning effect
Use Reboot+ as a maintenance for your ceramic coating
4 year guarantee with proper maintenance

Description:

Jade Ceramics are clear, nano-crystalline ceramic coatings that protect automobile substrates from weather, chemicals, physical abrasion and UV rays while repelling water, dirt and other contaminants via a self-cleaning effect. Jade Ceramics apply an ultra-hard, inert, durable coating that is several microns thick and imparts a deep, reflective shine.

Directions:

Ensure surface is clean and all paint correction is complete before applying coating. Use a surface prep spray to remove any oils or residues from polishing or claying. Saturate a suede applicator or similar with numerous drops of material from the dripper bottle. Apply the coating to a 3x3 ft area of the vehicle using a cross-hatch pattern with slight overlap to level the product. Wait until it becomes tacky and then gently remove excess product using a clean suede cloth or low nap microfiber towel. Check with your finger to assess tackiness. Do NOT allow coating to come in contact with water for 48 hours while curing - if it does, remove water promptly. Additional coats are not needed but if desired allow at least one hour between applications. Do NOT apply in direct sunlight or to a hot surface. Cure time is dependent on environmental conditions - test product on a small inconspicuous area first to gauge cure time.