Auto Magic PC3 Final Finish is a high-performance, ultra-fine finishing polish designed to deliver a flawless, swirl-free finish on your vehicle's paintwork. This premium-grade product is formulated with advanced micro-abrasives that effectively remove light imperfections, such as holograms, fine scratches, and swirl marks, while enhancing the depth and clarity of the paint. Auto Magic PC3 Final Finish is the ultimate choice for professional detailers and car enthusiasts who demand perfection and a show-car finish for their vehicles. Safe for use on all paint finishes and swirl free when used with the DA Polisher and Pads. VOC compliant and body shop safe.
Primary Uses:
- Removing light imperfections, such as holograms and fine scratches
- Eliminating swirl marks
- Enhancing paint gloss, depth, and clarity
Alternate Uses:
- Preparing vehicle surfaces for the application of waxes, sealants, or ceramic coatings
- Refining the finish after using a more aggressive compound or polish
Auto Magic PC3 Final Finish offers several advantages over other finishing polishes:
- Ultra-fine micro-abrasives provide exceptional finishing capabilities
- Delivers a flawless, swirl-free finish on various paint types and colors
- Easy-to-use and easy-to-remove formula
- Suitable for both professional detailers and DIY enthusiasts
- Compatible with both machine and hand application
Longevity:
- Auto Magic PC3 Final Finish delivers immediate results upon application. The longevity of the product's effects depends on proper application, subsequent care, and maintenance of the vehicle's paintwork, as well as the application of a protective product, such as a wax, sealant, or ceramic coating.
Directions for Use:
- Shake the Auto Magic PC3 Final Finish well before use.
- Apply a small amount of the polish to a clean, soft foam pad or a microfiber applicator for hand application.
- For machine application, set the speed of the polisher to a low or medium setting
- Work the compound into the paint surface using overlapping, circular motions, applying moderate pressure
- Keep the pad “wet” by spraying a mist of #502050 Lubri Shine onto the pad or surface
- Work the compound into the paint surface using overlapping, circular motions, applying moderate pressure.
- Continue working the compound until the desired level of defect removal is achieved.
- Remove any excess compound residue using a clean, soft microfiber towel.
- Inspect the area and repeat the process if necessary.
- Follow up with a protective product, such as a wax, sealant, or ceramic coating, to maintain the finish.
Finish and Residues:
- Auto Magic PC3 Final Finish leaves a clean, high-gloss finish on treated surfaces when used correctly. Any residue can be easily removed using a clean microfiber towel.
Best Practices:
- Always work on a cool, dry surface and in a shaded area.
- Use appropriate pads for machine application, such as soft foam pads.
- Test the product on an inconspicuous area before full application.
- Follow up with a protective product to maintain the finish and protect the paintwork.
Dilution Ratios:
- Auto Magic PC3 Final Finish is a ready-to-use product and does not require dilution.
Safety Information:
- Keep out of reach of children.
- Wear appropriate personal protective equipment, such as gloves and safety glasses, during use.
- Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water.
- If ingested, do not induce vomiting. Seek medical attention immediately.
- Use in a well-ventilated area.
- Store in a cool, dry place away from direct sunlight and heat sources.
