P&S Blast Super Cleaner - 5 Gallon

Strong...concentrated...versatile! Blast Super Cleaner works great for all industrial strength cleaning applications. Detergents and water based solvents effectively loosen dirt and grease from engines, wheels, tires, vinyl, carpet and upholstery. Blast may be used full strength on tough applications, or easily diluted with water for lighter cleaning applications. 

Primary Uses:

• Cleaning and degreasing engines, wheels, tires, and undercarriage components
• Removing stubborn dirt, grease, and grime from various automotive surfaces

Alternate Uses:

• Cleaning and degreasing surfaces in industrial, commercial, and residential settings
• Pre-treating heavily soiled areas before applying other detailing products

P&S Blast Super Cleaner - G25 is preferred by automotive professionals due to the following reasons:

• Powerful, heavy-duty cleaning and degreasing capabilities
• Fast-acting formula penetrates and breaks down even the most stubborn contaminants
• Versatile product suitable for a wide range of surfaces
• Gentle on surfaces, reducing the risk of damage

Directions for Use:

1. Ensure the vehicle is parked in a shaded, well-ventilated area, and the surfaces to be treated are cool to the touch
2. Dilute P&S Blast Super Clean - G25 according to the recommended dilution ratio (see below)
3. Apply the diluted product to the surface using a spray bottle, brush, or cloth, ensuring even coverage
4. Allow the product to dwell for 1-4 minutes, but do not let it dry on the surface
5. Agitate the area with a brush or cloth if necessary to help loosen stubborn dirt and grime
6. Rinse the treated area thoroughly with water to remove the product and neutralize the surface
7. Repeat the process as necessary for heavily soiled areas or stubborn stains

Finish and Residues:

• P&S Blast Super Cleaner - G25 leaves surfaces clean, refreshed, and residue-free. The treated areas will have a revitalized appearance with no sticky or oily residues

Best Practices:

• Do not use on glass or hot surfaces
• Test the product on an inconspicuous area before applying it to the entire surface
• Use separate brushes or cloths for different surfaces to avoid cross-contamination
• Do not let the product dry on the surface, as this may cause damage

Safety Information:

• Always read and follow the label instructions and safety information
• Keep out of reach of children and pets
• Wear appropriate personal protective equipment (gloves, eye protection) during application
• Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary
• Store the product in a cool, dry place away from direct sunlight and heat sources