P&S Defender SI02 Protectant Spray - Labeled Spray Bottle - 32oz

  • Picture of P&S Defender SI02 Protectant Spray - Labeled Spray Bottle - 32oz
  • Picture of P&S Defender SI02 Protectant Spray - Labeled Spray Bottle - 32oz
Part #: PB325
Fargo - Chat Or Call For Availability
Sioux Falls - In Stock
  • Empty, labled 32oz bottle
  • Does not come with sprayer
  • OSHA complaint

DEFENDER SiO2 Protectant is the ideal product for both professionals and enthusiast for use as a topper/maintenance treatment for ceramic coatings or as a stand alone SiO2 Protectant.  Defender SiO2 Protectant (DSP) is very easy to apply and use in most environments.  Defender creates incredible gloss, slickness and durable protection. Although Defender is primarily for painted surfaces it also can be used on metal, glass and trim.

Primary Uses:

  • Protective top coat for your vehicle's surfaces, defending against weather, chemicals, physical abrasion, and UV rays. Its hydrophobic properties repel water, dirt, and other contaminants, ensuring your car stays clean and looking its best for longer. This versatile graphene ceramic spray coating can be applied as a stand-alone protection or as a top coat over a more durable base protection.

Why Choose DEFENDER SiO2 Protectant:

  • Beginner-friendly: DEFENDER SiO2 Protectant is designed for ease of use, making it the perfect entry-level option for those new to ceramic coatings.
  • Long-lasting: Once applied, DEFENDER will provide protection for up to 6 months with proper maintance, reducing the need for frequent reapplication.
  • Glossy finish: DEFENDER leaves an ultra-smooth and glossy top coat, enhancing your vehicle's appearance
  • Versatility: This spray coating can be used as a stand-alone protection or as a top coat over an existing base layer
  • Easy application: DEFENDER's spray-on formula simplifies the application process, saving time and effort

Product Longevity:

  • DEFENDER SiO2 Protectant Coating is designed to provide 6 months of long-lasting protection for your vehicle when properly maintained

Directions for Use:

  1. Thoroughly wash and dry your vehicle, removing any dirt or contaminants from the surface.
  2. If necessary, use a clay bar or similar product to remove any remaining contaminants and prepare the surface for coating
  3. Shake the Defender bottle well before use.
  4. Spray a small amount onto an applicator pad
  5. Wipe the product onto the paint allowing the surface to be fully covered
  6. Allow the coating to flash. 
    • The product will look like a rainbow on the surface
  7. Buff to a high shine with another clean microfiber towel.
  8. Allow 1-4 hours cure before exposure to rain/snow/sleet or water

Best Practices and Aftercare

  • Avoid washing your vehicle for at least 4 hours after application to allow the coating to cure properly
  • Use pH-neutral car wash products to maintain the integrity of the coating
  • Regularly inspect the coated surfaces for signs of wear and reapply as needed

Brand P&S Detail Products
Weight 1 lb(s)
WARNING: Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or other reproductive harm. For more info go to www.p65warnings.ca.gov