P&S Dressed Tire Finish Dressing - 5 Gallon

We got UNDRESSED a few months back and now it is time to get DRESSED! DRESSED Tire Finish Polymer Based Tire Dressing is the perfect option for clients looking for an alternative to silicone based tire dressings. Used exclusively for tire dressing DRESSED Tire Finish is ideally applied with a brush or spray bottle. DRESSED Tire Finish is a 100% non hazardous water based product utilizing a blend of select polymers to mimic the performance of traditional solvent based silicone dressings.

Primary Uses:

• It is mainly used to restore a deep, rich black look to tires with a satin or glossy finish, depending on the application method.

Alternate Uses:

• It can also be used on rubber and plastic trim to enhance and protect those surfaces, preventing fading and cracking.

P&S Dressed Tire Finish has several advantages over competing tire dressings.

• Unlike many solvent-based dressings, it’s safe for the environment and won’t degrade rubber over time.
• Easier to apply and remove without leaving a greasy residue.

• You can control the finish by adjusting the application method:
  • One coat for a satin look.
  • Multiple coats for a glossier finish.

• Dries quickly and won’t sling onto the paint after application, unlike some high-gloss, silicone-heavy products.

• Helps protect tires from UV rays and prevents fading, cracking, and browning.
• Offers decent durability even in wet conditions.

• Water-based formula means it won’t stain driveways or require harsh chemicals for removal.

• Works on rubber, plastic, and trim, making it a more versatile product than some competitors that are strictly for tires.

Directions for Using P&S Dressed Tire Finish

• For best results, start with clean, dry tires.
• Use a tire cleaner and a brush to remove dirt, grime, and old dressings.
• Rinse thoroughly and let the tires dry.

• Before use, shake the bottle to ensure the formula is properly mixed.

• Use an applicator pad, tire sponge, or brush to apply the product evenly onto the tire surface.
• Avoid excessive application to prevent buildup.

• Allow the dressing to dry for 5-10 minutes to prevent sling.
• If you prefer a glossy finish, apply a second coat after the first one dries.
• For a satin look, wipe off excess product with a microfiber towel.

• Can also be applied to rubber and plastic trim for restoration and protection.

Safety Information for P&S Dressed Tire Finish

1. General Safety Precautions

• Use in a well-ventilated area to avoid inhaling fumes.
• Avoid contact with eyes and skin. Wear gloves if you have sensitive skin.
• Do not ingest—keep away from food and drinks.
• Keep out of reach of children and pets.

2. First Aid Measures

• Eye Contact: If product gets into eyes, rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
• Skin Contact: Wash affected area with soap and water. Discontinue use if irritation occurs.
• Inhalation: If inhaled in large amounts, move to fresh air. Seek medical attention if breathing issues occur.
• Ingestion: Do not induce vomiting. Rinse mouth and drink water. Seek medical attention immediately.

3. Storage & Handling

• Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep container tightly closed when not in use.
• Avoid freezing, as this may affect product performance.