P&S Odyssey Water Based Dressing - 5 Gallon

  • Picture of P&S Odyssey Water Based Dressing - 5 Gallon
  • Picture of P&S Odyssey Water Based Dressing - 5 Gallon
SKU: PS-L3505
Part #: L3505
Availability
Fargo - Chat Or Call For Availability
Sioux Falls - In Stock
  • Conditions, softens, preserves & protects leather, vinyl & rubber surfaces
  • Hybrid emulsion gel high quality, silicone dressing
  • Ready to use product
  • Not dilutable through the fill stations but can be diluted 1:1 up to 4:1 for more of a matte finish
  • Not body shop safe

P&S Odyssey Water Based Dressing conditions, softens, preserves and protects all leather, vinyl or rubber surfaces. Odyssey Water Based Dressing is a hybrid emulsion gel high quality, silicone dressing that may be used for all dressing applications. Odyssey leaves a beautiful natural shine on both the interior and exterior.

CONTAINS SILICONE. DO NOT APPLY TO STEERING WHEEL OR BRAKE, ACCELERATOR AND CLUTCH PEDALS.

Primary Use:

  • Designed for use on various surfaces, including tires, rubber trim, plastic, and vinyl

Alternate Uses:

  • Interior surfaces such as dashboards, door panels, and consoles
  • Engine components and hoses to keep them looking clean and newUndercarriages to provide a protective barrier against dirt and grime

Why Choose P&S Odyssey Water Based Dressing:

Versatility: Can be used on various surfaces, both exterior and interior
Water-based formula: Environmentally friendly and easy to use
Long-lasting shine: Provides a durable, high-gloss finish that lasts
Protection: Offers protection against fading and discoloration
Customizable dilution ratios: Can be adjusted for desired finish and application

Longevity:
P&S Odyssey Water Based Dressing typically lasts for several weeks after application. However, the longevity of the product may vary depending on factors such as exposure to the elements, driving conditions, and the frequency of washing

Directions for Use:

  1. Clean the surface to be treated, ensuring it is free from dirt, dust, and grease
  2. Dilute the product according to the desired finish and application (see dilution ratios below)
  3. Apply the diluted dressing to the surface using a soft applicator pad or spray bottle
  4. Allow the product to penetrate the surface for a few minutes
  5. Wipe off any excess product with a clean, dry microfiber cloth to avoid streaking or uneven application
  6. For tires, allow the product to dry completely before driving to prevent sling

Finish/Residues:

  • Provides a high-gloss shine without leaving any greasy or sticky residues when used as directed. The finish can be adjusted from a subtle sheen to a high-gloss shine by varying the dilution ratio

Best Practices:

  • CONTAINS SILICONE. DO NOT APPLY TO STEERING WHEEL OR BRAKE, ACCELERATOR AND CLUTCH PEDALS.
  • Test the product on an inconspicuous area of the surface to ensure compatibility and desired results
  • Use the appropriate dilution ratio for the desired finish and application
  • Keep the product away from children and pets
  • Store the product in a cool, dry place away from direct sunlight to maintain its efficacy

Dilution Ratios:

  • 1:1 (Equal parts water and dressing) for a medium-gloss shine on exterior surfaces
  • 4:1 (4 part water to 1 part dressing) for a matte finish on interior surfaces

Safety Information:

  • Avoid spilling onto floor. This will make floor slippery and cause a potential fall hazard
  • Wear gloves and eye protection when handling the product
  • Do not ingest or inhale the product
  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
  • If swallowed, do not induce vomiting and seek medical advice immediately

Brand P&S Detail Products
Weight 45 lb(s)
WARNING: Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or other reproductive harm. For more info go to www.p65warnings.ca.gov