Main Features:
- Powerful Air and Liquid Vortex: The Tornador Classic - Z-010 generates a powerful vortex of air and liquid that lifts dirt and grime from surfaces without the need for excessive scrubbing or harsh chemicals.
- Versatile Design: The Tornador Classic - Z-010 can be used with a wide variety of cleaning solutions and is suitable for use on a range of surfaces, including upholstery, carpets, and hard surfaces.
- Durable Construction: Made from high-quality materials, the Tornador Classic - Z-010 is designed to withstand heavy use and provide reliable performance in even the toughest cleaning environments.
- Easy to Use: The Tornador Classic - Z-010 is easy to use, with a simple design and intuitive controls that make it easy to achieve targeted cleaning results.
Why a Professional would use this over other products:
- Versatility: The Tornador Classic - Z-010 can be used with a wide variety of cleaning solutions and is suitable for use on a range of surfaces, making it a versatile tool that can be used in a variety of applications.
- Durability: With its robust construction and high-quality materials, the Tornador Classic - Z-010 is designed to withstand heavy use and provide reliable performance over time.
- Efficiency: The Tornador Classic - Z-010 is a highly efficient cleaning tool that can help professionals to save time and effort when tackling tough cleaning challenges.
- Cost-Effective: Compared to other professional-grade cleaning tools, the Tornador Classic - Z-010 is a cost-effective option that provides excellent cleaning results without breaking the bank.
TORNADOR Car Cleaning Tools are the fastest and easiest way to clean all automotive surfaces. The TORNADOR works with your air compressor to blast cleaning solution into crevices you can’t reach by hand. Clean carpet, plastics, and upholstery inside the car. Clean wheels, convertible tops, and body seams on the exterior. The patented TORNADOR Car Cleaning Tool tackles your most challenging detailing jobs with ease. The cone-shaped nozzle and oscillating tip create a tornado cleaning action that cleans hard and soft surfaces like nothing you’ve seen before. Dirt and grime are immediately released from fabrics, carpet, and solid surfaces. The TORNADOR Car Cleaning Tool releases a fine mist of cleaning solution that does not over saturate surfaces. You’ll see the liquid turning dirty as grime is released from the surface. Wipe with a microfiber towel. Then turn the dial to shut off the water and use the compressed air to dry the cleaned area. It’s that simple.
Use the TORNADOR Car Cleaning Tool on the dashboard, door panels, steering wheel, fabric upholstery, carpet, floor mats, and between seats. The TORNADOR cleans in tough-to-reach places between seats and in seams. Because it releases so little liquid, surfaces dry quickly. On the exterior, use the TORNADOR Car Cleaning Tool to clean fabric convertible tops, body seams, wheels, and emblems. There’s no need to scrub. The TORNADOR does the hard work for you. The TORNADOR Car Cleaning Tool must be used with an air compressor capable of producing a constant air pressure of at least 60 psi. Do not to exceed 90 psi in order to protect your TORNADOR from unnecessary wear. Use the green valve to control the amount of liquid released by the TORNADOR. To clean any surface, dilute the desired cleaner according to label’s directions. Turn the liquid valve straight up and use an overlapping motion as you pass the TORNADOR Car Cleaning Tool over the surface. If necessary, allow the cleaning liquid to dwell for 10-15 seconds. Use a microfiber towel to absorb excess liquid. Then turn the liquid valve off and use the compressed air to dry the cleaned area. Cleaning with the TORNADOR Car Cleaning Tool is easier and faster than small detailing brushes or swabs. Just spray and watch the dirt release from plastics, rubber, vinyl, and fabrics. The TORNADOR Car Cleaning Tool includes the gun itself with the 32 oz. jar and an extra cap for the jar. The TORNADOR Car Cleaning Tool is one of a kind. Clean and dry all hard-to-reach areas with the cyclonic cleaning power of the TORNADOR!
For optimal performance, the TORNADOR Car Cleaning Tool works best with an air compressor that produces 5 CFM, or at least 85 psi.
AIR REQUIREMENTS:
The Tornador cleaning tool requires a minimum air pressure of 75 to 90 psi, constant, for optimum performance. DO NOT EXCEED 90 psi. NOTE: Constant air supply may vary depending on compressor size and capabilities. Always make sure tank and air lines are free from oil and water contamination.
Cleaning Fabric
- Remove large debris and vacuum area to be cleaned.
- Turn liquid air valve to upright position to deliver cleaning solution.
- Hold cleaning nozzle 1 to 3 inches from area to be cleaned. Fully depress trigger. Begin with overlapping motion over area to be cleaned.
- Next turn valve to down position using just air and dry the area.
Cleaning Dashboard and Hard Surfaces.
- Recommended air pressure set at 75 psi
- Turn liquid valve to straight up vertical position, using a overlapping motion, spray area to be cleaned.
- Allow cleaning liquid to remain on surface for 10 -15 seconds.
- Follow with air only by turning valve to the horizontal down position. Begin drying with overlapping motion followed with a soft dry towel.
Best Practices and Tips:
- Must be used with an air compressor capable of producing a constant air pressure of at least 60 psi
- Do not to exceed 90 psi
- Use the Tornador Classic - Z-010 with a high-quality cleaning solution that is suitable for the surface you're cleaning
- Adjust the nozzle's position and cleaning solution concentration as needed to achieve the desired cleaning power
- Test the tool on a small, inconspicuous area before using it on a larger area to ensure that it doesn't damage the surface
- Hold the tool at a 45-degree angle to the surface you want to clean, and move it in a circular motion for best results
- Wipe away residual dirt and cleaning solution using a clean, dry towel or microfiber cloth after cleaning
- Clean the Tornador Classic - Z-010 after each use to ensure optimal performance and longevity
CARE & MAINTENANCE
- After every use, place nozzle 2-3 inches into a bucket of soapy water while depressing the trigger once or twice to quickly remove dirt buildup in the cone. This will prevent premature wear
- Avoid dropping the gun on the floor, disconnect when not being used
- Turn liquid valve to the horizontal position after use to avoid dripping from tip
- Tighten the jar while holding the lid to avoid loosening or stripping gun assembly
- Keep the cone of the gun clean by removing the cone and rinsing frequently
